Вахтовый автобус на шасси КАМАЗ
Автофургон на шасси ГАЗ
Передвижная лаборатория контроля состояния трубопроводов на шасси Камаз
Автофургон на шасси УРАЛ
Передвижной склад взрывчатых материалов на шасси Камаз- 43118
Передвижная электротехническая лаборатория ППУ на шасси Камаз
Линейная машина ЛМ-1 на шасси Камаз
Mersedes Unimog, Лаборатория связи

Mobile laboratory of electrochemical protection

Mobile laboratory is intended to diagnose corrosion state of oil and gas pipelines and other pipeline facilities, control of cathodic protection, repair of electrochemical (including electric welding) conducting survey work to establish a means of electrochemical when designing pipelines.

Specifications of box body «Laboratory ECP»

Name

quantity

KAMAZ chassis / URAL

 

Body-van: rectangular, made for frameless technology of sandwich panels with thickness of 50-60 mm. perimeter bound with aluminum corner;
Siding - plymetal; dyuralyuminevy sheet;
Inner lining - plastic of wooden tones;
Ceiling-white colour;
Thermal insulation - extruded polystyrene;
Covering of the floor- rugged linoleum, type «avtolin»;
The thickness of the «sandwich»panels is 50-60 mm .;
Size and layout of the body van agreed with the customer;
Body color is coordinated with the customer;
Galvanized hinges;

 

Climatic conditions of box body of frameless technology allows operation at: tC -40, +50;

 

Van body is divided into two sections: household, laboratory

 

Equipment of box body.

 

Household compartment

 

Side door blank is located on the right panel of the van body

1

Sofa locker

2

Sleeping bed is hinged

2

Autonomous air heater «Webasto Air Top 5500" Diesel distributed into 2 compartments

1

Ladder-retractable ladder with support on the ground, attached to the cassette under the body.

1

Plastic tilt and turn window with light-protective curtain, mosquito net

1

Emergency exit with fan

1

Intercom «cab-body» ADP-03

1

Lights 24V- 2 pcs., 220V- 1 pc.

1

Wardrobe ШРМ-11

1

Double socket

1

Laboratory compartment

 

Staircase for service of the front side of the mast

 

Tailgate - 2 x wing, with a blind window double glazing, with rubber seal, clamps, handrail.

1

Compartment with a propane tank 50 liters. on the back of the wagon body

1

Pins grounding wire and connector 2 pcs .. Connector "land" is mounted on the rear of the body, 1 piece.

К-т

Laboratory table on a metal frame, stainless steel table cover

1

Compartment for the diesel generator with a hatch for access to generator

1

Diesel or gasoline generator 5 kW

 

Air-exhauster 24V (with switch) on the back of the body.

2

Lights 24V- 4 pcs., 220, 1 pc.

К-т

Socket strip

 

Electrical control unit with ASU

 

At theback wall of the body is installed electric inputs 220 V (acquisition mating connector with cable 5 m. And with a fork). Wiring must be made to conduct appropriate section and packed in 2 locking cable channels

1

Metal cabinet for instruments

1

Table with a gas stove (connected to 50 liters. Propane cylinder)

1

Metal luggage box

2

Lifting device (250 kg)

1

Entrenching tools: shovel, crowbar, hammer

 

Spotlight is installed (and connected) above the rear door from the outside of the body (with switch)

 

Highway emergency warning triangle

1

First-aid box

1

Setting the upper and lower marker lamps.

 К-т


Setting the side marker lights.

 К-т

Drawing on the perimeter of the box body, reflective tape, in accordance with GOST.

 

 

This wagon body might be supplemented with the necessary equipment, devices and to perform all the functions of the «Laboratory ECP».