Вахтовый автобус на шасси КАМАЗ
Автофургон на шасси ГАЗ
Передвижная лаборатория контроля состояния трубопроводов на шасси Камаз
Автофургон на шасси УРАЛ
Передвижной склад взрывчатых материалов на шасси Камаз- 43118
Передвижная электротехническая лаборатория ППУ на шасси Камаз
Линейная машина ЛМ-1 на шасси Камаз
Mersedes Unimog, Лаборатория связи

Mobile storage of explosive materials on the chassis Kamaz 43118

 

передвижной склад взрывчатых материалов  автомобиль для перевозки и хранения вв взрывчатых веществ

Technical requirements for the manufacture of medium vans for special mobile storage of explosive materials model 48583-04 (TU 4523-026-75697160-2010) based on KAMAZ-43118 chassis. 

Name

 quantity

Chassis: Kamaz-43118 

1

Body-van: a rectangular shape with a dispenser compartment, produced of "sandwich" panels.

Internal dimensions of box body - 6100x2400x1900mm., Thickness of "sandwich" panel - 50mm.
Еxterior panel - plymetal.
Inner lining - plywood treated by refractory impregnation;
Flooring - corrugated aluminum.
Color box body is in concurrence with the customer.

Location of spare wheel holder - operational

 

 

1

Partition separating the box body into two compartments.

1

Compartment of the dispenser.

Detector-Fantan-1 (20K)

1

Single-wing door,fitted with an internal lock and the device, which allows to make sealing, and fitted with a signal of door opening with output to the driver's cab.

1

Plastic window double glazing with a protective grille.

1

Soft sofa-locker

1

Distributor’s table coated with countertops made of rubber.

1

Airtronic D2 diesel heater

Floodlamp lighting is in a solid safety net or mesh installed in the upper part of the front wall of the box body.

1

Ladder 4 step

1

The cargo compartment. 

Double-leaf door at the body back panel, is equipped with a signal of door opening (the signal displayed in the driver's cab), the door is equipped with a lock замком сундвального типа that ensures no opening doors, as well as the device allows to produce sealing. Door opening angle of 270 degrees.

1

Dry powder extinction system "Buran"

2

Floodlamp lighting is in a solid safety net or mesh installed in the upper part of the front wall of the box body.

1

Vehicle equipment

tachograph Kezel

1

Flashing Light of orange colour installed on the roof of the cab.

2

Flashing Light of orange color with self-contained supply

2

Fire-extinguisher OP-8 and OU-5 (mounted on the front wall of the box body).

2

Wheel chocks, corresponding to the diameter of the wheel.

2

Metal chain with a grounding with land touchdown spot 200mm

1

Across the width of the rear box body is set shockproof bumper.

1

Ground pin with a cable of 15m.

1

Spade (mounted under-trailers).

1

Medical first aid box.

1

Ladder-staircase with emphasis on soil

1

Adaptation of the chassis.

Carry forward muffler exhaust pipe on the right side in front of the radiator with a downward angle with a spark arrestor.

+

Protection of the the fuel tank at the sides with metal plates (the distance between the tank and the plate is not less than 20mm).

+

The accumulator is located in a ventilated compartment, switch of power cable with two drives, one is in the driver's cab, one is outside.

+

Wiring is routed in a protective cover, rated voltage of electrical equipment must not exceed 24V.

+

Wiring consists of wires, protected by the seamless sheath, which is kept out of corrosion and designed in a way as to prevent it from heating.

+

Electric system is protected from high loads with automatic fuse

+

A set of documents for registration in STSI

1

The warranty period of box body is 30,000 km or 1 year depending on which event occurs first

Time of manufacture is 30 working days from receipt of payment.

Any changes in the configuration are prior to the manufacturing process.